Information Bar
The information bar is located at the top of the display and shows important status information. Icons are displayed from left to right:
Current Time
Shows the current time. If the time is incorrect, check the time zone settings in system settings.
Battery
If the battery icon is blinking, the device is currently charging.
| Battery status | |
|---|---|
| 100% |  |
| 75% |  |
| 50% |  |
| 25% |  |
| 5% |  |
GPS
Indicates the quality of the GPS signal. The maximum is 4 bars – the more bars are lit, the better the signal.
| Icon | Icon status | Accuracy |
|---|---|---|
 | Blinking | no GPS data available |
 | Lit | accuracy is better than 100 m |
 | Lit | accuracy is better than 25 m |
 | Lit | accuracy is better than 15 m |
 | Lit | accuracy is better than 10 m |
| Lit | accuracy is better than 5 m |
Bluetooth
- Blinking icon means Bluetooth is enabled, but the controller is not connected to any device (it's visible).
- Solid icon indicates that the controller is connected via Bluetooth to another device. The controller can only be connected to one device at a time.
Notifications
After receiving a notification, the bell icon starts blinking.
SD card
If you see the SD card icon blinking, it means the SD card in the device is missing or not working properly. See the instructions for replacing the SD card.
/ 
Recording
- Blinking dot means that recording is in progress.
- Blinking vertical bars indicate that recording is paused.
Details can be found in the recording section.
Recording Time
Shows how long the current recording has been running. 00:00 (Hours : Minutes)